发表论文
1. SCI 收录论文:
1) Shi X, Lu X, Feng Y, Qiu Z. Tribo-dynamic analysis for aero ball bearing with 3D measured surface roughness. Engineering Failure Analysis. 2021 Nov 1:105848. (第一作者)
2) Shi XJ, Lu XQ, He T, Sun W, Tong QS, Ma X, Zhao B, Zhu D. Predictions of friction and flash temperature in marine gears based on a 3D line contact mixed lubrication model considering measured surface roughness[J]. Journal of Central South University. 2021, 28(5):1570-83. (第一作者)
31) Sun W, Shi X, Hua D, Li R, Ma X, Zhao B, Lu X. Stress analysis of marine gears considering 3D mixed lubrication-contact state. Surface Topography: Metrology and Properties. 2021 Sep 6;9(3):035037.(通讯作者)
4) Shi X, Wu J, Zhao B, et al. Mixed thermal elastohydrodynamic lubrication analysis with dynamic performance of aero ball bearing during start-up and shut-down[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2020, 234(6): 873-886. (第一作者)
5) Shi X, Wang Q, Wang L. New Galerkin-vector theory and efficient numerical method for analyzing steady-state heat conduction in inhomogeneous bodies subjected to a surface heat flux[J]. Applied Thermal Engineering, 2019, 161: 113838. (第一作者)
6) Shi X, Sun W, Lu X, et al. Three-dimensional mixed lubrication analysis of spur gears with machined roughness[J]. Tribology International, 2019, 140: 105864. (第一作者)
7) Shi XJ, Wang LQ, Zhou QH, Wang Q. A fast approximate method for analyzing heat conduction in inhomogeneous half space, applicable to frictional heat transfer. Journal of Tribology. 2018,140: 041101 (第一作者)
8) Shi XJ, Wang LQ, Qin FQ. Non-Gaussian surface parameters effects on Micro-TEHL performance and surface stress of aero-engine main-shaft ball bearing. Tribology International. 2016, 96:163-72. (第一作者)
9) Shi XJ,·Wang LQ, Qin FQ. Relative fatigue life prediction of high-speed and heavy-load ball bearing based on surface texture, Tribology International. 2016, 101:364-374. (第一作者)
10) Shi XJ, Wang Liqin, Mao Yuze, Qin Fenqi. Coupling study on dynamic and TEHL behavior of high-speed and heavy-load ball bearing with spinning [J]. Tribology International, 2015, 88: 76-84. (第一作者)
11) Shi XJ, Wang L. TEHL analysis of high-speed and heavy-load roller bearing with quasi-dynamic characteristics. Chinese Journal of Aeronautics. 2015, 28(4):1296-1304. (第一作者)
2. 发明专利:
1) 史修江,王优强,付小芯.带凹槽滑动轴承及润滑方法[P].发明专利:201310008504.3, 2016-01-13.
3. EI 收录论文:
2) 史修江, 王黎钦. 基于拟动力学的航空发动机主轴滚子轴承热弹流润滑分析. 机械工程学报. 2016; 52(3): 86-92.(国内主流杂质,EI)
3) 史修江, 王黎钦, 古乐, 郑德志, 赵小力. 基于拟动力学的航空发动机主轴球轴承热弹流润滑分析. 航空动力学报. 2016(1): 233-40. (国内主流杂质,EI)
4) 史修江, 王黎钦, 郑德志. 考虑动力学特性的航空发动机主轴球轴承热弹流分析[J]. 摩擦学学报, 2015, 04: 415-422. (国内主流杂质,EI)
5) 史修江,王优强. 不同载液磁流体热弹流润滑性能对比[J]. 机械工程学报,2013,48(4):92-96.
4) Xiu-Jiang Shi, You-QiangWang. Micro thermal elastohydrodynamic lubrication analysis of power law water-based ferrofluid journal bearing, Advanced Materials Research, 2013, Vol.694-697, March, p. 543-546.
6) Xiu-Jiang Shi, You-QiangWang. Study of Micro-morphology Influence on The EHL Analysis of Water-based Ferrofluid. Applied Mechanics and Materials, 2013, Vol.373-375, June, p. 417-420.
7) You-Qiang Wang, XiuJiang Shi, FuE Ren. Friction and Wear Mechanism between Rubber and Nickel for Water Lubricated Bearings, Advanced Materials Research, 2012, March, Vol.530, Jun, p.91~94.
8) YouQiang Wang, XiaoXin Fu, FuE Ren, XiuJiang Shi. Experimental Study on Tribological Mechanism of water-lubricated Bearings' Rubber/Nickel Coating Pair, Lecture Notes in Information Technology, 2012, Vol.22, June, p.47-52.
4. 中文核心论文:
1) 史修江,王优强. 不同载液的磁流体轴承的等温弹流润滑分析[J]. 磁性材料及器件,2014, 45(2): 14-17
2) 史修江,王优强. 水基磁流体滑动轴承热弹流润滑分析[J]. 轴承,2013(1):32-35.
3) 史修江,王优强. 磁场强度对水基磁流体弹流润滑性能的影响分析[J]. 机械设计与制造,2013(4):223-225.
4) 史修江,王优强. 指数率水基磁流体热弹流润滑分析[J]. 机械设计与制造,2013(5):149-152.
5) 史修江,王优强. 指数率水基磁流体滑动轴承单峰时变热弹流润滑分析[J]. 润滑与密封,2013,38(7):36~40.
6) 史修江,王优强. 指数率水基磁流体滑动轴承微观热弹流润滑分析[J]. 轴承,2013(9):36-39.
7) 史修江,王优强.微形貌对水基磁流体滑动轴承弹流润滑影响研究[J].润滑与密封,2013,38(11):50-54.
8) 史修江,王优强. 水基磁流体轴承微观时变热非牛顿弹流润滑分析[J]. 轴承,2013,12:33-36.
9) 史修江,王优强. 磁流体润滑机床主轴滑动轴承弹流润滑分析[J]. 润滑与密封,2012,37(10):41~44.
10) 史修江,王优强. 考虑惯性力的水基磁流体润滑滑动轴承热弹流润滑分析[J]. 润滑与密封,2012,37(12):40~42.