1:Multi-objective optimization of jet impingement cooling structure with smooth target surface and enhanced target surface in a limited space: International Communications in Heat and Mass Transfer;
2:Effect of pore plugging on transpiration cooling performance implemented with perforated flat plates:International Communications in Heat and Mass Transfer;
3:The investigation of double wall cooling configuration with spherical cavity: International Communications in Heat and Mass Transfer;
4: The heat transfer enhancement mechanism of W-shaped micro-ribs on impingement cooling:APPLIED THERMAL ENGINEERING;
5: Numerical investigation on transpiration cooling performance of turbine blades with non-uniform porosity:APPLIED THERMAL ENGINEERING;
6:Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators:INTERNATIONAL JOURNAL OF THERMAL SCIENCES;7: Numerical research for the influence of cylindrical ribs and inclined mainstream on double wall cooling configurations:INTERNATIONAL JOURNAL OF THERMAL SCIENCES;
8: Aerodynamic noise and its reduction of the marine gas turbine air exhaust system:JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA;
9:Numerical investigation on transpiration cooling performance of turbine blades with non-uniform porosity: APPLIED THERMAL ENGINEERING;
10: Analysis of flow field and aerodynamic noise of marine gas turbine air intake system: JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA;
11:Research for double wall cooling configuration with flower shaped ribs:INTERNATIONAL JOURNAL OF THERMAL SCIENCES;
12:Effects of the configuration of the delta winglet longitudinal vortex generators and channel height on flow and heat transfer in minichannels: APPLIED THERMAL ENGINEERING;
13:Similarity characteristics of geometric scaling matrix cooling channels in turbine blade: APPLIED THERMAL ENGINEERING;
14:Optimization of Rib Shape and Inclination in a Square Duct With Response Surface Methodology: JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME;
15:Effect of connecting holes on flow and heat transfer in a two-pass channel with and without rib turbulators International Journal of Heat and Mass Transfer；
16:Effect ofbleed hole on internal flow and heat transfer in matrix cooling channel Applied Thermal Engineering;
17:Investigation of Laminar Separation Bubble on Flat Plate with Adverse Pressure Gradient: Time-Averaged Flow Field Analysis International Journal of Aerospace Enginering ;
18:Similar Characteristics of Heat Transfer in Different Scale Cooling Channel with Ribs:Heat Transfer Engineering；
19:Simulation of a Shock Tube with a Small Exit Nozzle Journal of Thermal Science 2018.02,27(1):p34-38 20:Effect of sidewall slots and pin fins on the performance of latticework cooling channel for turbine blades Applied Thermal Engineering;
21:Research on the lean and swept optimization of a single stage axial compressor : ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS；
22:NOISE SOURCE IDENTIFICATION FOR THE UNSTEADY LOW PRESSURE TURBINE FLOW FIELDS:Proceedings of the ASME Turbo Expo 2024;
23:Numerical investigation of the effects of system volume and average mass flow on the surge characteristics of an axial compressor :AEROSPACE SCIENCE AND TECHNOLOGY；
24:Large eddy simulation of flow and heat transfer mechanism in matrix cooling channel ASME Turbo Proceedings 2017年 :
25:A CFD method study on the resistance performance of the axial flow cyclone separator ASME Turbo Proceedings 2017年 2017/6/26 第一 Ei:
26:Investigation of Performance of High Velocity Air Intake Wave-plate Separators for Marine Gas Turbines ASME Turbo Proceedings 2016年2017/6/26 第一 Ei:
27:Numerical investigation on flow and heat transfer in matrix cooling channels for turbine blades ASME Turbo Proceedings 2016年 2017/6/26 第一 Ei:
28:交错肋通道换热实验与响应曲面研究，工程热物理会议论文 2016.11.22-25 通讯作者
29: 热敏液晶标定实验及影响因素分析 工程热物理会议论文 2016.11.22-25 通讯作者
30:Sun, Haiou(#)，Bu, Shi，Luan, Yigang(*)，A high-precision method for calculating the pressure drop across wire mesh filters，Chemical Engineering Science，2015，127：143-150，EI,SCI 通讯作者
31:气冷燃机涡轮叶片的气热耦合数值研究，船舶工程，2013，（06）：30-34.
32:无节流器轴流旋风气液分离器性能研究，动力工程学报，2011，（02）：142-147
33:Application of porous jump boundary conditions in numerical simulation study of marine gas turbine exhaust ejector，Journal of the Chinese Society of Mechanical Engineers;
34:切向进气旋风分离器内部流场特性研究，ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012，77-85，Houston, TX, United states，2012.11.9-2012.11.15，EI
35:Ω型惯性气液分离器性能研究，热能动力工程，2010，（04）：394-398
36:室内密闭与通风空间气溶胶扩散特性[J].环境工程,2021,39(04):79-85. 通讯作者
37:抽吸孔对交叉肋冷却通道内部流动和传热的影响[J].哈尔滨工程大学学报,2021,42(04):535-540+573. 通讯作者
38:带半椭球凹坑微通道流动换热的数值模拟[J].热能动力工程,2020,35(09):104-111. 通讯作者
39:Fluent软件在牛顿平板流动现象可视化演示中的应用[J].黑龙江科学,2019,10(04):22-23
40:提高专业型硕士培养质量的若干建议[J].教育教学论坛,2020(18):135-136.41:Fluent软件在牛顿平板流动现象可视化演示中的应用[J].黑龙江科学,2019,10(04):22-23.
42:关于船舶动力装置教材改革的建议[J].新校园(上旬),2016(07):112.
43:研究生创新与实践培养模式探索——以气粒两相流课程为例[J].教育教学论坛,2020(51):119-120.
44:CFD软件在突扩、突缩流动现象可视化演示中的应用[J].黑龙江科学,2016,7(03):10-12.
45:基于GDP导师团队指导模式下的燃气轮机性能分析课程设计及实践[J].黑龙江科学,2019,10(01):32-33.
